Add each print location (front, back, sleeve, and so on), set the print size and print type, and upload the file (max 20 MB) or paste a cloud link on that location. Print type options update with this product and your total qty (under 10 pieces is DTF). Size, placement, and print type are used for decoration pricing. A transparent PNG works best. Templates & specs
Check the box to continue.
- 6.7 oz./yd² (US), 11 oz/L yd (CA), 88/12 recycled polyester/elastane
- Moisture-management properties
- Self-collar
- Three-button placket
- Open hem sleeve
- Contrast silicone logo on right sleeve
Responsible Materials: contains 88% recycled polyester
Responsible Supplier: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified.
*The Adidas logo on sleeve is Grey on all colors except Grey Three. Grey Three has a white logo as shown.
EZ-INK prints this blank to order. The price is for the undecorated garment. Choose a color and sizes, then add decoration and upload artwork on this page before checkout. Decoration is priced separately. Production time is shown in the cart.
| Size | XS | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 28 | 28 3/4 | 29 1/2 | 30 1/3 | 31 1/9 | 32 | 33 | 34 |
| Chest Circumference | 37 4/5 | 40 1/6 | 43 1/3 | 46 1/2 | 49 3/5 | 53 1/2 | 57 1/2 | 62 1/5 |
| Sleeve Length | 9 | 9 1/3 | 9 2/3 | 10 | 10 2/7 | 10 3/5 | 11 | 11 2/9 |
Measurements are in inches.
Print types
Choose a print type for each artwork location. Options update with this product and your quantity: under 10 pieces is DTF; hats default to Headwear 1 Color. Families that support a single-color job also list a 1 Color option. Default for apparel at 10+ is 1 Color. File: vector or a transparent PNG. See full specs.
Default
1 Color
A single-color version of Wearable, LoMelt, Blocker, Soft Shell Blocker, LoMelt Blocker, Headwear, and Promo. Not available on DTF, Neon, or Reflective. Default at 10+ pieces.
Full color
Wearable
Cotton, poly-cotton, and non-sublimated polyester. Full color, gradients, and photos.
Short run
DTF
Minimum 1. Used for orders under 10 pieces.
Fabric
Blocker / LoMelt
Blocker for dye migration. LoMelt for heat-sensitive fabric. LoMelt Blocker when you need both.
Specialty
Neon / Reflective
Neon from 20 pieces. Reflective for night and safety. Promo for bags.
Product
Headwear / Soft Shell / Promo
Headwear for caps. Soft Shell Blocker for softshell. Promo for bags and coated items.
Care depends on the decoration. If the tag in the garment is stricter, follow the tag. The same steps are on the care instructions page.
Transfers and DTF
Use this for our transfers. On the product page that is DTF, Wearable, Blocker, LoMelt, LoMelt Blocker, Soft Shell Blocker, Headwear, Promo, Neon, Neon Blocker, and Reflective, including a 1 Color version of a film that offers it. Print only uses this care after the film is pressed on.
Our transfers are lab tested.
- Independently wash tested by Intertek Testing Services. No cracking or fading through 70 wash cycles. Only slight cracking appears after the 70th wash.
- OEKO-TEX Standard 100 certified. Tested against up to 350 chemicals.
- CPSIA and Prop 65 compliant. The inks are water-based, phthalate-free, and lead-free.
- Wait before first wash
- No wait.
- Inside out
- Not required.
- Wash
- Cold, with like colors.
- Bleach and softener
- Non-chlorine bleach only.
- Drying
- Tumble dry low.
- Ironing
- Warm iron if needed.
HTV
Heat transfer vinyl: a cut vinyl graphic, not the films above. If your order names a film, use Transfers and DTF. We do not state a wash-cycle count for HTV.
- Wait before first wash
- Wait 24 hours before the first wash.
- Inside out
- Wash inside out.
- Wash
- Warm or cold, with a mild detergent.
- Bleach and softener
- No bleach. No fabric softener.
- Drying
- Tumble dry low, or hang it to dry.
- Ironing
- Do not iron on the vinyl. If you need to iron, turn the garment inside out and use a low setting.
- Dry cleaning
- Do not dry clean.
Screen printing
Ink printed through a screen onto the garment.
- Wait before first wash
- Wait 24 hours before the first wash.
- Inside out
- Wash inside out.
- Wash
- Cold, with a mild detergent.
- Bleach and softener
- No bleach. No fabric softener.
- Drying
- Tumble dry low, or hang it to dry.
- Ironing
- Do not iron on the print. Turn the garment inside out and use a low setting, or put a pressing cloth between the iron and the fabric.
Embroidery
A logo stitched onto hats, beanies, polos, fleece, and bags.
- Wait before first wash
- No wait.
- Inside out
- Wash inside out.
- Wash
- Cold or warm, with a mild detergent.
- Bleach and softener
- No bleach. No fabric softener.
- Drying
- Hang it to dry, or tumble dry low.
- Ironing
- Press the fabric around the stitches. Do not iron on the stitches.
Signs, banners, and commercial printing are not garments. Do not use these wash steps for them.